Soap grease by Planol

Property and application:

Our liquid soft soap is a cleaning agent that does not require labeling and can be used in a variety of ways. For example, it can be used as a concentrate for the quick, thorough, and gentle cleaning of various plastics to reduce friction, or as a release agent for separating metal from asphalt in asphalt construction, on buildings, in road construction, etc.

It can also be used to remove green coating.

Soap grease is used for cleaning and caring for sealed wood and wood-plastic composites indoors and outdoors. Additionally, it is suitable for all water-resistant surfaces such as PVC, plastic, and rubber nub floor coverings, for natural and artificial stone floors, and for concrete and stone surfaces.
It can also be used for the environmentally friendly removal of green stains.

Soap grease leaves an antistatic, dirt-repellent protective film, is slip-resistant, and is easy to polish after. As a long-term protection for emulsion-treated surfaces, it offers additional UV protection.

Before using the soap grease, the surfaces to be cleaned should be freed from coarse dust and loose dirt using a stiff broom or hand brush.

The product is dosed according to the application recommendation using a dispensing bottle in a washing bucket. Subsequently, the area is cleaned as usual. The floor should be mopped wet. After a short exposure time and possibly scrubbing the area, the dirty water is collected. No wiping is necessary afterwards.

For normal dirt, 50-100 millilitres of the cleaner are added to 8-10 litres of water. For heavier soiling, the concentration can be increased.

Additionally, the surface can be cleaned with a 5-10 percent solution. For a radiant shine, it can be polished afterwards.

The compatibility of the substrate should be checked before using grease soap.

Grease soap must be transported and stored at temperatures above freezing.